Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

Hello All,

New to the CUCM platform. I have CUCM 8 with MGCP controlled gateways and route patterns.

I need to POC a new SIP trunk to this environment. I have CUBE on one of my MGCP controlled gateways where the SIP to ITSP resides. I worked with Cisco and they instructed me how to add the SIP trunk and the dial peers and translations on the gateway....

The problem I am finding is how do I route calls from my already registered phones to the SIP trunk for testing ?

I do not want any calls other than the test calls I am doing to route out the sip ...Access code via a newly added SIP route pattern ?

Any replies appreciated.

Thanks,

Bill

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

A specific route pattern using the SIP trunk as Gateway/Route List option. Less specific route patterns should catch everything else and route to existing mgcp gateway.

3 REPLIES
Bronze

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

A specific route pattern using the SIP trunk as Gateway/Route List option. Less specific route patterns should catch everything else and route to existing mgcp gateway.

Community Member

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

Agreed, just to clarify...It does not have to be a SIP route pattern ?

IE Call Routing>

    Route/Hunt>

    RoutePattern

Bronze

CUCM 8 wMGCP controlled gateways..need to add SIP trunk

That is correct.

134
Views
0
Helpful
3
Replies
CreatePlease to create content