Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 9.1 Call Recording for analogue devices

Hi,

We are designing a CUCM 9.1 solution where Active Call Recording for analogue devices feature is required.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmfeat/CUCM_BK_CEF0C471_00_cucm-features-and-services-guide_chapter_0100110.html

Record - Feauture Support.JPG

According the feautre list support it seems that is supported by the old ata 186 but not by the ata 187.

Then, how could we achieve this on a new deployment? Has anyone had the chance to deal with this?

Many thanks in advance. Thank you very much,

Francesc

1 REPLY
VIP Super Bronze

CUCM 9.1 Call Recording for analogue devices

This is a weak spot in the native Cisco solution portfolio. I'll try to give one option but hopefully others will chime in with something more clever.

The MediaSense product can record trunk-side from Cisco CUBE which allows for device-agnostic recording; however, that only works if you're not concerned about internal calls to/from the analog phones (i.e. just to/from the PSTN). Getting the last part seems to require old fashioned SPAN recording to a capture server of a third party. This can get dicey though because most of the third-party recording vendors manually decipher the SCCP packets to figure out the calling/called party information. Be sure to ask them whether SCCP- or MGCP-controlled gateways are supported.

Please remember to rate helpful responses and identify helpful or correct answers.

306
Views
0
Helpful
1
Replies
CreatePlease to create content