Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM backup on Windows 7!

Hi all,

I am facing problems while trying to backup my CUCM on Windows 7.

I use freeSSHd, it was working fine on Windows XP and Windows Vista. I did tens of backups and restores so the configuration on CUCM and SFTP server are 100% correct (Server name, path, username and password).

Since I moved to windows 7 last month, I haven't been able to perfom any backups, nor any 'file get tftp' from putty.

The file get tftp gives me: Invalid username/password combination.
The update in the backup device page gives me:                                  Update failed : Unable to access SFTP server or SFTP server too  slow to respond.Please make sure the login credentials and path are  correct.

I paused my kaspersky antivirus and tried again with no luck.

When I open the FreeSSHd software, I try to enable SSH, it gives me the message 'Generic error for access violation'.

I installed FreeFTPd, I tried to start the SFTP service there, it gave the same error 'Generic error for access violation'.

My CUCM is running on version 7.0.1.11000-2.

Any help would be appreciated!

8 REPLIES

Re: CUCM backup on Windows 7!

Hi Mazen,

I had similar issues using freeftpd on Windows 7.  I ended up using GuildFTPd (also free) which worked without any issues.

Chris

Please rate helpful posts

New Member

Re: CUCM backup on Windows 7!

Hi clileikis,

I tried the GuilFTPd, still the same problem!

Update failed : Unable to access SFTP server or SFTP server too slow to  respond.Please make sure the login credentials and path are correct.

Re: CUCM backup on Windows 7!

Hi Mazen,

Sounds like a windows issue to me.  If you can confirm network connectivity is fine and you can ping, I would start checking to make sure you don't have multiple FTP programs running or multiple instances of freeftpd running that could be causing issues, disabling Windows firewall and testing (Control Panel > System and Security > Windows Firewall), and try right clicking the freeftpd program and 'Run as Administrator'.

HTH,

Chris

Please rate helpful posts

New Member

Re: CUCM backup on Windows 7!

Still nothing changed! :S

Firewall and antivirus are off. I can ping the CUCM normally and access it via http.

New Member

CUCM backup on Windows 7!

Hi,

I was running on the same issue, so I remembered that Windows come with FTP (IIS), so I check using netstat -an if my computer was listening on port 21.

As I confirmed that IIS FTP was running, I just stopped and started the freeFTPd with success.

Regards,

Fabio Funaki

New Member

thanks . your post helped . i

thanks . your post helped . i could see my servr was listening to port 21 using iis.. stopped the service and my freeftpd worked 

New Member

CUCM backup on Windows 7!

Try software from website  http://www.bitvise.com/

I had the same problem and personal version of WinSSHD works perfect.

New Member

CUCM backup on Windows 7!

I had the same problem but have now solved it.

I installed Freesshd as a service and each time i tried to start the Server from the settings page it came back with the error

'Generic error for access violation'.

I think this is because its trying to start it twice.

I uninstalled and this time didnt install as a service

Works fine now

Darren

10798
Views
5
Helpful
8
Replies