Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM install

Hi Everyone

I wanted to know can someone point me to the right document that will show me how to install a subcriber in one of our office locations.

The company I work for already has a cluster with a PUB and SUB in Texas and a SUB in Georgia.We just recently purchased another

company in NY and they are going all CIsco gear. So I wanted to know how do I install the SUB and tie it back to the PUB in Texas. I also

wanted to know how do I import all of the new phones for that location.The site is going to have 400 new users with new phones and I need to

know how  do I get all of those phones into the system.Thanks in advance for any help that I may receive and I greatly appreciate it.     

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CUCM install

Other than making sure you meet the CoW requirements on the SRND there's nothing special about the install.

The install guides on CCO cover install of a PUB and a SUB

Installing Cisco Unified Communications Manager  Release 8.6(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html

Have you already reviewed the online documentation and info that is available on previous threads, if you search for how to install a SUB on CSC you'll find a bunch of them.

Import phones?? You'll have to elaborate on that. You can use BAT or the import/export option.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

CUCM install

Other than making sure you meet the CoW requirements on the SRND there's nothing special about the install.

The install guides on CCO cover install of a PUB and a SUB

Installing Cisco Unified Communications Manager  Release 8.6(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html

Have you already reviewed the online documentation and info that is available on previous threads, if you search for how to install a SUB on CSC you'll find a bunch of them.

Import phones?? You'll have to elaborate on that. You can use BAT or the import/export option.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
VIP Super Bronze

CUCM install

Also be sure to read the SRND to understand the round-trip delay restrictions between nodes and the bandwidth that you will need to set aside for database/signaling traffic. Some of this is a full-mesh traffic pattern so each node you add will raise bandwidth between all nodes. This is important to ensure to understand and to be confident that your WAN can meet the requirements.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html#wp1043996

Please remember to rate helpful responses and identify helpful or
332
Views
0
Helpful
2
Replies