Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM integration with Right FAX(Enable T.38 protocol on Cisco MGCP GW)

             HI All , I am going ot integrate cucm 8.6 & mgcp VG with right fax . Can you provide me  the document.

PSTN---GW----Mgcp-----CUCM 8.0X----SIP-----RightFax

Moreover does CUCM 8.6 support t.38 fax protocol??how i enbale T.38 on mgcp VG.

Thankyou in advance..

2 REPLIES
Cisco Employee

CUCM integration with Right FAX(Enable T.38 protocol on Cisco M

VIP Super Bronze

CUCM integration with Right FAX(Enable T.38 protocol on Cisco M

Hi,

This is the MGCP config you need to enable T.38

mgcp

mgcp call-agent x.x.x.x.x 2427 service-type mgcp version 0.1-----------------------x.x.x.x is your cucm ip address

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

mgcp default-package fxr-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp bind control source-interface GigabitEthernet0/0-------------------you need to bing mgcp to whatever interfcae you are using

mgcp bind media source-interface GigabitEthernet0/0

mgcp profile default

Please rate useful posts

"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
1824
Views
0
Helpful
2
Replies