Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

The actual install to the inactive partition went fine.  Trying to switch versions failed.  I didn't get any other info.

Looking at the uptime of the services it seems the server never even rebooted.

Help!

Edit:  This server is a VM.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

You are correct, I meant to say issue the switch-version command.

Chris

8 REPLIES
Hall of Fame Super Silver

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

What does "show version active" and "show version inactive" show?

Have you tried rebooting it manaully, i.e. " util system restart"?

Chris

New Member

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

The active version is 8.6.1.20000-1, inactive is 8.6.2.2000-2.

If I reboot is manually wouldn't that just reboot it and not switch versions?

Hall of Fame Super Silver

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

You are correct, I meant to say issue the switch-version command.

Chris

New Member

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

I'll have my client give that a shot.


Thanks!  I'll let you know how it goes.

New Member

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

That worked!

"utils system switch-version"

Thanks!

+5

Hall of Fame Super Red

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

Hey "G",

Hope all is well buddy!

Although your version shows as "fixed-in" it sounds very much like this bug;

CSCts32387 - Switch Version fails after a Refresh Upgrade to 8.6.2 or 9.0

Description

Symptom:

Switch Version fail after refresh upgrade to 8.6.2 or 9.0

Conditions:

Any refresh upgrade to 8.6.2.10000-30 or 9.x

Workaround:

Workaround #1 - While doing a RU choose to switch to new version. Subsequent

switches will not fail in that case

Workaround #2 -

Contact TAC and provide remote access.

Details

1st Found-in:                          (1)

9.0(0.95020.6)

Status:

Fixed

Last Modified:

Nov 17,2011

Fixed-in:                          (5)

8.6(2.99000.92), 8.6(2.98000.56), 8.6(2.98000.24)

8.6(2.21001.1), 8.6(2.20000.2)

Product:

Cisco Unified Communications Manager (CallManager)

Platform:

Dependent

Severity:

2 - severe

Customer Reported:                          (10)

Cheers!

Rob

New Member

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

Hi

I also need to update CUCM 8.6.1 to 8.6.2, can you please mention the steps to update or any guide which you followed ?

Regds

$

Cisco Employee

CUCM Upgrade Failed: From 8.6.1.20000-1 to 8.6.2.20000-2

Answered here https://supportforums.cisco.com/message/3814641

GP.

Pls rate the post if it helps !!

911
Views
0
Helpful
8
Replies
CreatePlease login to create content