We are looking to upgrade our CUCMBE CM and Unity System to 7.1.5(SU4) and eventually 8.5. Our current versions are as follows -
Cisco Unity Connection Administration
Cisco Unified CM Administration
System version: 18.104.22.1680-10
I've downloaded the upgrade iso from Cisco's website and acquired proper PAK keys. However; I've found very little information on the upgrade process itself. Will the upgrade media update CM and Unity at the same time or does this require one and then the other? Is there much to the upgrade besides basic information such as IP, NTP, Publisher information, DNS, exc...? Also, are there any items that are known to require reconfiguration after the upgrade (Unity or CM side)?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...