Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUE failover in a CME 4.0 redundant config scenario

Hi,

can someone, please, describe what happens to CUE vm in the case of a failover to a redundant CME router. I am assuming that the 2nd router has to have identical VM boxes created and all new VMs will be stored on the 2nd router until the 1st router comes back online.

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: CUE failover in a CME 4.0 redundant config scenario

there is no standard configuration to allow for CUE failover, per TAC.

one big problem is that the two CUE voice mail boxes cannot be synchronized.

although you can very well have a CUE system configured with duplicate information, a manual failover would be required.

failover CUE is not supported by cisco at this time per TAC.

2 REPLIES
Blue

Re: CUE failover in a CME 4.0 redundant config scenario

there is no standard configuration to allow for CUE failover, per TAC.

one big problem is that the two CUE voice mail boxes cannot be synchronized.

although you can very well have a CUE system configured with duplicate information, a manual failover would be required.

failover CUE is not supported by cisco at this time per TAC.

New Member

Re: CUE failover in a CME 4.0 redundant config scenario

ok...as I expected. Thank you for your response!

242
Views
0
Helpful
2
Replies