I am working with an NM-CUE 3.1.1 and was wondering if there was a way to upload user voicemail greetings. I know you can upload prompts for scripts but this is not what I want to accomplish. The issue is we use a Generic voicemail greeting for the operator at all sites and instead of recording each site one by one. It would be nice to record this once and just upload it as the operator's voicemail greeting.
Thanks Paolo. I was able to locate where to upload the greetings as you suggested.
The only issue I ran into is that it would not allow me to upload a greeting to the "standard" greeting slot or even the "closed" greeting slot. The "upload" option was greyed out on those and was only allowing me to upload to the "alternate" greeting. Is this normal? or is it possible that it is this way because I had already recorded a custom message in the standard and closed slot (using the phone interface). I couldn't figure out how to delete the previously recorded greeting. The only options available to me was to either edit (or re-record) the existing message, turn on the system message, or play nothing. No delete existing custom message.
For right now I've just uploaded the custom produced greetings to the "alternate" greeting slot and enabled that message to play on the mailbox, but I would really rather have them as the "standard" message to avoid having the alternate message accidentally turned off by someone checking messages each day.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...