Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUE Voicemail greeting 4sec delay

Hi,

I'm running CCM 4.2(3) and integrating it with CUE 3.2.2

My problem is with the voicemail playing the greeting after 4 seconds from connecting to the CTI port.

A few things I've checked:

This problem occurs on all of my licensed 6 CUE ports

no overlapping route patterns on ccm

cti ports, and route points are registered

clock on CUE is syncronized to correct ntp server

JTAPI user for CUE is associated with all cti and route points

I'm able to dial GSM port 6901, and auto attendant 6902 without any delay.

Is there anything else I could be missing?

I've attached config of CUE.

TIA,

-Fred

**note I purposely distorted usernames on attachd config, its not an error*

4 REPLIES
New Member

Re: CUE Voicemail greeting 4sec delay

Hi Fred,

I am just finished with CME 7.0(1) and CUE 3.2.2 upgrade and I have exactly the same problem as you.  It is ~4 secs voicemal delays playing user greeting.

Any solutions for this problem?

Thanks,

Serge

New Member

Re: CUE Voicemail greeting 4sec delay

Same here... Any resolution?

Dan

New Member

Re: CUE Voicemail greeting 4sec delay

Hi guys,

I have the same problem but, worse, I have CUCM 5.1.3 and A NM of Unity Express with 200 User licenses, The AA work perfect, but whe any user try check you Voice Mail, the delay is about 20 Sec. Any news?

Regards.

New Member

Re: CUE Voicemail greeting 4sec delay

From my experience what happens is as soon as unity sees a connection it starts playing the greeting..by the time you hear it could be 3 4 seconds into the greeting. I tried this with pretty good results

Go to the

1) Tools Depot.

2) Switch Integration Tools.

3) Edit Switch Utility

4) Edit

5) Incoming Calls tab.

6) Change "Delay Before Opening" Try a value from 2-5 seconds

7) Apply and OK.

8) reboot the Unity server

223
Views
0
Helpful
4
Replies
CreatePlease to create content