CUEAC main service - Attendant Console Server cannot start
We have tried to integrate the CUEAC with version 8.6.1 to CUCM with version 8.5.
The customer provide us a windows server 2003 R2 SP2 which used to install the CUEAC. The installation run smooth with no errors, however, after the installation, we found that the main service Attendant Console Server cannot start.
The service keep trying to initiate but never succeed. This service cannot start which means we cannot configure anything to function. After the failure, we install another windows 2003 standard edition and all the stuff working fine.
So my question is, is that any policy or windows update patch will cause the issue? As the one works fine have no patch and no policy define at all, but the one provided by the customer need to apply policy, anti-virus and windows patch. The point is we need to use the OS provide by the customer instead of install by ourselves. Any advice?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...