Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUMA 7.1.3 Dial via office issue

Hi,

I am facing a issue with dial via office. The issue is that on the server status tab i get " Dial via office error". Also another issue that i am facing is i am unable to retreive voicemail info as it says "Voicemail -unauthorised". The login credentials for voicemail are different from the login credentials.

Any help would be welcome.

regards

ashwin

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CUMA 7.1.3 Dial via office issue

Hi,

One of the most common reason for this error is that the number of mobile devices
configured on CUCM is different from the number of provisioned devices on CUMA.
Besides, you need to have matching numbers in the CUMA profile and the remote destination.

Refer to Pg 15 on the following doc:

--> How to Solve Problems With Dial Via Office

http://www.cisco.com/en/US/docs/voice_ip_comm/cuma/7_1/XML/troubleshooting/cuma71_troubleshooting.pdf

For the VM issue, refer to:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cuma/7_0/english/install/guide/cuma_70_IAG_19_trouble.html#wp1065519

HTH

Regards,

Tere.

Regards, Tere. If you find this post helpful, please rate! :)
2 REPLIES
Cisco Employee

Re: CUMA 7.1.3 Dial via office issue

Hi,

One of the most common reason for this error is that the number of mobile devices
configured on CUCM is different from the number of provisioned devices on CUMA.
Besides, you need to have matching numbers in the CUMA profile and the remote destination.

Refer to Pg 15 on the following doc:

--> How to Solve Problems With Dial Via Office

http://www.cisco.com/en/US/docs/voice_ip_comm/cuma/7_1/XML/troubleshooting/cuma71_troubleshooting.pdf

For the VM issue, refer to:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cuma/7_0/english/install/guide/cuma_70_IAG_19_trouble.html#wp1065519

HTH

Regards,

Tere.

Regards, Tere. If you find this post helpful, please rate! :)
New Member

Re: CUMA 7.1.3 Dial via office issue

Hi Tere,

Thanks for the reply. Well that was the small mistake i made.I prefixed the mobile with a '0' when configuring mobility identity in cucm and did not do so when provisioning the mobile in cuma. We opened a case for the same.Feel bad that i made a silly mistake.Now DVO shows connected but still cant get any call through.

We get the callback on the mobile phone,but it says that it cant reach the number you dialled.We are using Mgcp gateway so all call contriol would be with CUCM. We are troubleshooting that now.

Any ideas on how to resolve this?

regards

Ashwin

492
Views
0
Helpful
2
Replies