Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUMA and MCS-7825I4-K9-IPC1, ask for drivers

trying to install Mobility Advantage 7.x on a MCS-7825I4-IPC1 server.  After asking for localization infor (country, language etc), I get an error "no device found".  What driver do I need?  Do I need to download a specific driver?

1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

It's "supposed" to be non-bootable.  But please try it.  You might be surprised.

BTW, this kind of issue cannot be solved by "two-stage" upgrade, because it failed at the very first beginning.  You won't even get to the part that asking you if you want to apply a patch.

Michael

6 REPLIES
Red
New Member

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

Those are non-bootable DVD ISO.  What can I use to boot the server?

thanks.

Super Bronze

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

Hi

If I recall correctly, 7.x of CUMA has the same install routine/OS as CallManager... if that is the case, then did you see prompt during install along the lines of 'Do you want to install a patch as part of this upgrade'?

If you did see that you should be able to answer yes and point the server at the downloaded file on an SFTP server...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Red

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

It's "supposed" to be non-bootable.  But please try it.  You might be surprised.

BTW, this kind of issue cannot be solved by "two-stage" upgrade, because it failed at the very first beginning.  You won't even get to the part that asking you if you want to apply a patch.

Michael

New Member

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

Hi,

Just wondered if you managed to get this working and what the resolution was as I am facing the same issue now.

thanks

Charl

New Member

Re: CUMA and MCS-7825I4-K9-IPC1, ask for drivers

download the non-bootable ISO cuma 7.1(3) installer from CCO.  Try to use the non-bootable ISO to boot server.

704
Views
0
Helpful
6
Replies
CreatePlease login to create content