Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUOM 2.1 for CUCM 7.1

Hi all,

I've read on 'hw/sw compatibility' about cuom 2.1 and cucm compatibility and I've noticed that the last CUCM release supported is the 7.0(1): is the 7.1 supported too? If no, what about roadmap?

Many thanks in advance for your support

Gianluca

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUOM 2.1 for CUCM 7.1

Hi Gianluca,

You would need to be at CUOM 2.2 according to this roadmap;

Cisco Unified Operations Manager Compatibility with Cisco Unified CM Release 3.x Through Release 7.x

From this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56381

Table 73;

Cisco Unified Operations Manager Version 2.1

Cisco Unified Communications Manager Version

4.1, 4.2, 4.3, 5.0, 5.1, 6.0, 6.1, 7.0

Cisco Unified Operations Manager Version 2.2

Cisco Unified Communications Manager Version

4.1, 4.2, 4.3, 5.0, 5.1, 6.0, 6.1, 7.0, 7.1

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: CUOM 2.1 for CUCM 7.1

Hi Gianluca,

You would need to be at CUOM 2.2 according to this roadmap;

Cisco Unified Operations Manager Compatibility with Cisco Unified CM Release 3.x Through Release 7.x

From this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56381

Table 73;

Cisco Unified Operations Manager Version 2.1

Cisco Unified Communications Manager Version

4.1, 4.2, 4.3, 5.0, 5.1, 6.0, 6.1, 7.0

Cisco Unified Operations Manager Version 2.2

Cisco Unified Communications Manager Version

4.1, 4.2, 4.3, 5.0, 5.1, 6.0, 6.1, 7.0, 7.1

Hope this helps!

Rob

140
Views
0
Helpful
1
Replies
CreatePlease to create content