We have a cluster of 3 CUCM servers, with the Publisher and one of the Subscriber at a single location and the other Subscriber at a different location. The cluster is running on version: 184.108.40.2060-1.
We would like to integrate a single CUPS server (version: 220.127.116.110-12) with the CUCM cluster.
However, I read through a document that states "The Cisco Unified Presence cluster is not supported in Cisco Unified Communications Manager deployments with clustering over the WAN".
I am trying to integrate a single CUPS server and not a CUPS cluster with the CUCM cluster. Would like to know if I can go ahead with the integration requirement that I have or if I need to consider any other options.
I got a negative reply from PDI Helpdesk, which does not help.
I would really like to if someone has had a similar scenario or can advise for a workaround.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...