CUP is integrated to custers OCS servers to provide call control. Customer is changing their OCS servers to OCS R2 (new servers) , they are also changing domain the OCS servers sit in.
Would I be correct to assume that all we have to do is update the existing incoming access control lists for the new servers and also update our dns server's to resolve to the new domain - please advise, any other changes.??
The proxy domain is currently not set anyway so hopefully won't need to touch that. Customer will require both OCS servers to be working in tandem for migration , i.e OCS 2007 and OCS 2007 R2 ..... Regards Jaginder
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...