SO I installed CUP on one of the HP media servers, that was a loaner from cisco. As you know they arent available anymore so I recieved the IBM version when I ordered the box. The install starts then asks me where the media packages are coming from, I say "CDROM" and it says there are no drivers.
I go to "select drivers" and pick the LSI drivers and it doesnt work. I select "use driver disk" and try to load the drivers from a disk and I get the same error. So I went looking for an ISO for CUP 6.0(4) specific to the IBM media servers and found nothing.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...