Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUPC 8 and MPX 2.1.1.2 Video Conferencing

CUCM 8.0(3)

CUPS 8.0(2)

CUPC 8.0.1

MPX 2.1.1.2

We are having trouble with video conferencing 3 people together ad-hoc in CUPC 8.  We can get 2 way video/audio with 2 people, but when conferencing in the third person, it goes to audio only.  We have an MPX ad-hoc conference bridge registered to CUCM.  The MRG/MRGL contains this conf bridge and is assigned to all phones.  I've seen multiple documents, including the CUPC 8 Datasheet, say that MPX VT2.0 is one of the requirements for Video Conferencing in CUPC 8. MPX-standard is not listed.

Example:

Video conferencing

Required for impromptu video conferencing:

• Cisco Unified Videoconferencing 5.7, 7.0, or 7.1

• Cisco Unified MeetingPlace 8.0

• Cisco Unified MeetingPlace Express-VT 2.0

I assume that's not accurate, based on other posts.

What are we missing here?

3 REPLIES
Red

Re: CUPC 8 and MPX 2.1.1.2 Video Conferencing

MPX and MPX VT use the same installation DVD but two installation options.

For video conferencing, you need to install MPX VT, not MPX.

Michael

http://htluo.blogspot.com

New Member

Re: CUPC 8 and MPX 2.1.1.2 Video Conferencing

Is that to say MP 8 would fix this issue as well (from the table above)?  Because right now we are hard-pressed to justify them upgrading from MPX to MP8 given that it does not fix the voice prompt issue I posted in another section.  We'd definitely rather upgrade to MP8 (even though it means them buying 2GB more ram for their existing server) than crossgrade to MPX-VT.

Red

Re: CUPC 8 and MPX 2.1.1.2 Video Conferencing

I would say MP7 or MP8 would be a better option if you're using CUPC 8.

Michael

http://htluo.blogspot.com

439
Views
0
Helpful
3
Replies