Make sure that on the CUP server under Application > Cisco Unified Personal Communicator > LDAP Server, you are pointed to port 389 and NOT 3268. The jpegPhoto attribute is not available in Microsoft Active Directory Global Catalog server (port 3868), and this attribute is not indexed (http://msdn2.microsoft.com/en-us/library/ms676813.aspx). Also I see that your BusinessPhoneNumber (Application > Cisco Unified Personal Communicator >Settings) is mapped to an AD attribute set to 67032948 but the dialed number is only 2945. You'll need to moduify the directory lookup rules too so that the number in LDAP match to the called number (37032948 -> 2945).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...