Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUPC & CCM5.1.2 but NO CUPS

Hi All,

I have a CCM5.1.2 Cluster without CUPS. I am wanting to use CUPC on desktops for call control etc...

The issue is authentication see below:

2007-09-12 14:28:38,846 [0x120] DEBUG LCMiddleware - Service::Start() - Service[ConfigurationManager], currentState[SERVICESTATE_OFFLINE]

2007-09-12 14:28:38,846 [0x120] INFO LCWIN32UI - (WINUI_LOGIN_DIALOG_ONCLOSE) Login Dialog 0x1e86420 is closing

2007-09-12 14:28:38,846 [0x4a4] DEBUG LCMiddleware - Service::StartupThread() - Service[ConfigurationManager], currentState[SERVICESTATE_OFFLINE]

2007-09-12 14:28:38,846 [0x4a4] DEBUG LCMiddleware - Service::StartupThread - Starting Service [ConfigurationManager] uid[7]

2007-09-12 14:28:38,846 [0x4a4] DEBUG LCMiddleware - ConfigurationManager::StartProc()

2007-09-12 14:28:38,846 [0x4a4] INFO LCMiddleware - (MWMSG_EIM_ADDINGLISTENERS) Adding all EPASInterfaceManager listeners

2007-09-12 14:28:38,846 [0x4a4] DEBUG LCMiddleware - Service::Start() - Service[EPASInterfaceManager], currentState[SERVICESTATE_OFFLINE]

2007-09-12 14:28:38,846 [0x4b4] DEBUG LCMiddleware - TimerManager::TimerThread started

2007-09-12 14:28:38,846 [0x4bc] DEBUG LCMiddleware - Service::StartupThread() - Service[EPASInterfaceManager], currentState[SERVICESTATE_OFFLINE]

2007-09-12 14:28:38,846 [0x4bc] DEBUG LCMiddleware - Service::StartupThread - Starting Service [EPASInterfaceManager] uid[8]

2007-09-12 14:28:38,846 [0x4bc] DEBUG LCConnection - ConnectionManager: REGISTER CONNECTION: ConnectionType: CUPS_CONFIG, server list: primary=10.44.10.3:443(https), backups=

retry timer: EXPONENTIAL : minWait=500(ms), maxWait=64000(ms), maxRetries=0, totalRetries=0, retryInterval=500(ms)

failover timer: EXPONENTIAL : minWait=500(ms), maxWait=64000(ms), maxRetries=0, totalRetries=0, retryInterval=500(ms)

failback timer: EXPONENTIAL : minWait=500(ms), maxWait=64000(ms), maxRetries=0, totalRetries=0, retryInterval=500(ms)

failback policy: ROUND_ROBIN

2007-09-12 14:28:38,862 [0x4bc] DEBUG LCConnection - CUPS_CONFIG startConnection(): 10.44.10.3:443(https)

2007-09-12 14:28:38,862 [0x4bc] DEBUG LCConnection - CUPS_CONFIG setState(): [IDLE] --> [CONNECTING_PRIMARY]

2007-09-12 14:28:39,784 [0x4bc] ERROR LCMiddleware - (MWMSG_EIM_SOAPLOGINFAILED) Failed to log in to SOAP server https://10.44.10.3/EPASSoap/service, Host unreachable

2007-09-12 14:28:39,784 [0x4bc] DEBUG LCConnection - CUPS_CONFIG setReason(): [NONE] --> [UNREACHABLE]

2007-09-12 14:28:39,784 [0x4bc] ERROR LCMiddleware - (MWMSG_CFGMGR_EPASSERVICEERR) ConfigurationManager::Update_ServiceError() - CUPS service error [1]

2007-09-12 14:28:39,784 [0x120] ERROR LCWIN32UI - (WINUI_ERROR_SERVICE_ERROR) ******** CONFIG MANAGER ERROR [1] **************

2007-09-12 14:28:39,784 [0x4bc] DEBUG LCConnection - CUPS_CONFIG setState(): [CONNECTING_PRIMARY] --> [ERROR]

2007-09-12 14:28:39,784 [0x4a4] ERROR LCMiddleware - (MWMSG_SERVICELIST_WAITABORTED) ServiceConditions::Wait(4) - ABORTED

2007-09-12 14:28:39,784 [0x4a4] DEBUG LCMiddleware - ConfigurationManager::AbortProc() - condition[4]

2007-09-12 14:28:39,784 [0x4a4] INFO LCMiddleware - (MWMSG_EIM_REMOVINGLISTENERS) Removing all EPASInterfaceManager listeners

2007-09-12 14:28:39,877 [0x120] INFO LCWIN32UI - (WINUI_LOGIN_DIALOG_OPENING) Login Dialog 0x1e7ae88 is opening

2007-09-12 14:28:41,299 [0x120] INFO LCWIN32UI - (WINUI_LOGIN_DIALOG_ONCLOSE) Login Dialog 0x1e7ae88 is closing

Any help would be beneficial..

Many Thanks

3 REPLIES
Hall of Fame Super Silver

Re: CUPC & CCM5.1.2 but NO CUPS

Check the troubleshooter page on CUPS server for any issues.

Chris

New Member

Re: CUPC & CCM5.1.2 but NO CUPS

Chris,

There is no CUPS Server.

Its a straight 5.1.2 Cluster and nothing else.

Surely CUPC can work without a CUPS Server???

Hall of Fame Super Silver

Re: CUPC & CCM5.1.2 but NO CUPS

You need CUPS server for CUPC to log into.

Chris

127
Views
0
Helpful
3
Replies
CreatePlease login to create content