CUPC Newbee. On the "Recent" tab of CUPC, is it possible to setup dialing rules so when you double-click an external number it will prefix with the proper 9 or 91 in front of the number? I tried it with Application DIal Rules in CM but it didn't work. Is that only for Outlook CLick to Dial?
No it is not only for Outlook click to dial. I have the application dial rules setup to check the number of digits and prepend either a 9 or a 91 to the number.
It works great, however, I have had to educate my users that for long distance calls in the home area code they have to include the 1 on the number when dialing from Outlook. Without the leading 1 in the outlook contacts it treats it as a local call and removes the area code.
I'm relatively a newbie to UPC and I wanted to know if you know of any settings I need to set to allow LD dialing from UPC. When users try it, they get "Out of Service" in the UPC window. What I really want to do is allow users to dial LD via UPC and prompt for an access code.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...