Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUPC Fails to Connect over VPN

We recently implemented a Presence 7.0 setup. We are unable to get any CUPC clients to connect over VPN. We are using MS ISA VPN and the built-in MS VPN client. I'm really not sure where to start looking to troubleshoot this issue. Any ideas?

Robert

6 REPLIES
Red

Re: CUPC Fails to Connect over VPN

You may troubleshoot in the procedure below:

1) Exit CUPC

2) Start packet capture on CUPC computer

3) Launch CUPC and wait until it stablized.

4) Stop packet capture

5) Look at SIP messages

Normally, you'll see messages as below:

1) REGISTER (CUPC -> CUPS)

2) SUBSCRIBE (CUPC -> CUPS)

3) SUBSCRIBE (CUPC -> CUPS)

4) SUBSCRIBE (CUPC -> CUPS)

5) PUBLISH (CUPC -> CUPS)

6) NOTIFY (CUPS -> CUPC)

Michael

http://htluo.blogspot.com

New Member

Re: CUPC Fails to Connect over VPN

Maybe I'm doing this incorrectly. When you talk about a packet capture, do you just mean taking a wireshark capture? I've tried that I'm not seeing any SIP traffic.

Red

Re: CUPC Fails to Connect over VPN

Can you upload the packet capture and CUPC problem report here?  (CUPC > Help > Create Problem Report).

Michael

New Member

Re: CUPC Fails to Connect over VPN

Here you go, thank you for your help.

Red

Re: CUPC Fails to Connect over VPN

Not sure if you took the capture on the right interface.  But I couldn't find 10.50.7.12 (CUPS server) in packet capture.

Michael

New Member

Re: CUPC Fails to Connect over VPN

I believe this is related to the issue. There the PPP interface created by the VPN connection is not available for capture to Wireshark. I think it's a DNS resolution issue but I'm still trying to figure it out.

617
Views
0
Helpful
6
Replies