I have installed and configured CUCM 8.6, CUPS 8.5 (90 day trial), CUPC 8.5.5 and 7945 IP Phone in my lab. I have End-user (Cisco170) on my CUCM, which controls 7945 and CUPC device and have associated line 170. Both devices has 170 line as well. I have created Trunk with proper SIP Trunk Security profile (Accept Presence Subscription, Accept Out-of-Dialog REFER, Accept Unsolicited Notification & Accept Replaces Header checked).
I can see my user on CUPS, I can login with CUPC, even make a call from my deskphone using CUPC. But CUPC device is unable to register on CUCM (I see status Unknown). I do not know why? When I go to System Troubleshooter everything is green. Is there something what I can check?
The problem was that I use "Cisco Unified Personal Communicator" as Phone Type. When I use "Cisco Unified Client Services Framework" it starts registering. It seems CUPC Phone Type is deprecated or something in CUCM 8.x. This is little bit confusing
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...