i have an CUCM 6.0 and an CUPS 6.0, with the IP Phone Messnger Service, installed in my LAB. When i send an IM Message, with IPPM, from one Phone to another, nothing happens. (The Message will not Pop-Up automatically) When i want to see the message i have to go to "Messages" within the IPPM.
In my old LAB, with an CCM5.1 and CUPS1.03, it worked.
Does anybody know how to troubleshoot such an issue, or what the error could be?
In fact, the problem is with your application User!!! you have previously to create on in CCM5 (i have created one and called it PhoneMessenger)) And i assume when u changed to CCM6 u have either forgot to do an other Application user or u did an application user and u forgot to associate the IP phones that u want to activate Phone Mesennger service on them.
Make sure to associate the end users to the Application user.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...