Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUPS 6.0 with CUCM 6.0 Presence not working with CUPC

Hi everybody!!

I am trying to integrate a CUPS 6.01 server with a CUCM 6.01 server.

I have configured the Personal Communicator 1.2.2 as a softphone. Using monitor servers health of CUPC it seems everything is correct except Presence (Red button, and message "connecting")

I think the problem is with SIP Proxy registration. It starts:

2008-02-18 18:23:40,076 [0x6ac] INFO LCWabiAccount - (WABIMSG_CONFIGURING) Starting registration process on 1 SIP proxies

2008-02-18 18:23:40,076 [0x4fc] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (usuario1@PROXY_DOMAIN_NOT_SET ) (0x017a1338), instance=52, proxy=192.168.20.5:5060, reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false

2008-02-18 18:23:40,076 [0x4fc] INFO LCWabiSinks - (WABIMSG_REGSTATE4) ********* CUPS (usuario1@PROXY_DOMAIN_NOT_SET ) (slot 0) REGISTER STATE: Discovery...

But after 10 seconds

2008-02-18 18:23:50,168 [0x884] ERROR LCMiddleware - (MWMSG_SERVICELIST_WAITTIMEDOUT) ServiceConditions::Wait(0) - TIMED OUT after 10000 ms

Is it right? Is there any tip with SIP Proxy Server configuration in Presence Server? Is there anything I am missing?

Thanks in advance,

Xavi

1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: CUPS 6.0 with CUCM 6.0 Presence not working with CUPC

Go to CUPS admin page -> System -> Service Parameters -> SIP Proxy.

Set the SIP proxy domain to the IP address of the CUPS server.

Then restart SIP proxy service

3 REPLIES
Bronze

Re: CUPS 6.0 with CUCM 6.0 Presence not working with CUPC

You could be hitting with a bug: check the details of this bug:CSCsj12982

New Member

Re: CUPS 6.0 with CUCM 6.0 Presence not working with CUPC

Hi,

Thank you for your reply. Finally, I found the problem:

It was the problem: the proxy domain. I changed it to the Presence IP Address and it worked.

Regards,

Xavi

Red

Re: CUPS 6.0 with CUCM 6.0 Presence not working with CUPC

Go to CUPS admin page -> System -> Service Parameters -> SIP Proxy.

Set the SIP proxy domain to the IP address of the CUPS server.

Then restart SIP proxy service

290
Views
0
Helpful
3
Replies
CreatePlease to create content