10-25-2010 06:31 PM - edited 03-19-2019 01:48 AM
I thought I had everything working perfectly today on my CUPS 7.0.8 server with CUPC 7.1.1.13850, but it seems I'm still missing one piece... I'm unable to set/retrieve Presence status when I'm not onsite. To clarify:
What works:
Desktop Phone Control
Softphone Control
All Green (Including Presence) on Server Health Status
What doesn't work:
User appears offline
Can't set status
Can't use IM
Can't see others' status
I searched through the forums and saw where it was recommended to go to CUPS > System > Security > Incoming ACL and then create a new entry for All, All so I tried this, but it has had no effect. Is there something I'm missing with that, or is there something else I should be looking at altogether?
I can post a log if it will help.
UPDATE: For a bit of clarification, for my "offsite" connection I am connected to the site by VPN tunnel, so DNS resolution is not an issue, and I do otherwise have access to that VLAN, but kudos if someone can identify any necessary ports I need to open for true outside access for my users for CUPC.
10-26-2010 03:44 PM
Here is a log file in case it helps with troubleshooting.
I made a successful call to myself via softphone, a failed IM with the word "test", a forced attempt to set status as Available, and a few minutes of idle while it waited for retried connections. I'm also posting a screenshot of the Server Health Status.
10-27-2010 05:27 PM
Still looking for some assistance on this one... I'm sure it's probably something simple I'm missing, but it's driving me crazy.
10-31-2010 12:13 PM
Am still looking for some help on this if anyone has any experience with this issue.
Thank you in advance!
01-31-2011 03:06 PM
Found the answer... turns out that I had to disable SIP filtering on my ASA.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: