When I run System Dashboard, the error I get back is "Verify SIP Publish Model."
Failed to verify host connectivity. Please check if using DNS SRV for host cuplogin.olson.local Please verify whether DNS SRV is enabled for this host. Its possible the connection to this host is working properly but the Troubleshooter is unable to determine connectivity because DNS SRV is enabled.
I can verify using nslookup that the SRV record points to the correct destination. I've configured SRV cluster name as "
_cuplogin._udp.XXXX.local" and Address Resoluton Type is set to "SRV."
Matthew Berry | Solutions Architect, CCIE #26721 (Voice)
World Wide Technology, Inc. | +1 612-219-0040
PS Engineering: Innovate & Ignite
I actually opened a TAC case on this issue. It turns out that this is a cosmetic defect in 8.6(3). It should be resolved in a future release. As long as the phone presence works correctly, there is not an issue.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.