The presence bar customize show in outlook and get name of contacts... but don't call. I'm add the contact on outlook to personal contacts and editing fields, so after update the cups dial the numbers?
It's normal? The cups calls just contacts on personal contacts list on Outlook?
I believe you may be looking for Application Dial rules. Application Dial rules are programmed on the CUCM (CallManager/Unified Communications Manager) server. The dial rules will take digit strings you specify and normalize them to what you need.
I receive a e-mail (a person of my company) and outlook allow I call this person using the cupc on tool bars. But the number field is blank or not available.
So when I add this person on my personal contact list on outlook, I can edit this telephony number field and so call.
My problem not is manipulation digits. Is call number not available until I don't add the people on my personal contact list on Outlook, on another words, the cupc by outlook don't use the telephony number of contact from Outlook, just when I add this contact on my personal contact list.
This is unfortunately how the software seems to work - you can't dial directly from the GAL/Outlook 'from'/'to' fields, but can add people to your personal directory and then dial them. It does seem a little odd as the information is already there before you add it to the directory.
In my lab I had Click2Dial (the UC Widget) set up on the same workstation, and this allowed a right click/Additional Actions/Call to be done on the 'to'/'from' field in emails to people who aren't in the contacts list. It would be nice if CUPC had this capability!
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...