Hi I am building a new CUPS server. When I login on the CUPS GUI as the OS Administrator and do a show hardware it shows that RAID is not configured however when I view the RAID configs at the HP hardware level via the HP Smartsuite CD I can see that the RAID has been configured properly with one logical drive. I have logged a case with our local integrators TAC who have advised that it is just a cosmetic issue and not to worry. I even upgraded my CUPS from 6.0.3 to 6.0.5 but to no success. Our platform is a 7835 MCS server. Has anyone else encountered this i.e how does your CUPS RAID look when viewed via the CUPS OS Administration login?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...