Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

CUPS6.2 + CUCM 6.1

HI Guys

Trying to get the above up and running. Every thing looks to be configured but when i run the trouble shooter i keeping getting the following:

Possible missing SIP trunk on Cisco Unified Communications Manager. Each Cisco Unified Presence server should have a corresponding SIP trunk configured (unless DNS SRV is enabled). Possible missing entries include: cups

Following the admin guide it says to use the <Cups-name>sip.com as the trunk destination address. In my example the server is called cups so i have used cups.sip.com.

Am i missing some thing?? I also tried creating a domain in active directory: cups.poc.com

but still no luck.

Any help would be very welcome.

M

1 REPLY

Re: CUPS6.2 + CUCM 6.1

The documentation is wrong. Do not use .sip.com. Simply use the actual FQDN (resolveable via dns from the CCM CLI "utils network ping") or the IP address of the CUPS.

Hope this helps.

93
Views
0
Helpful
1
Replies
CreatePlease to create content