Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Customer does not want to use access codes in a new CME...

My customer has new CME's that all of a sudden, they no longer want to use "dial 9" access codes to make calls. We have two in state "local" area codes (10 digit), and everything else is 1+.  Do I create Dial Peers or Translations tables to make this work? Dial 9 is simple, and I've used other features in other systems to do this, but my CME experience is limited.  CUCM is more my style.

Any help would be appreciated. Thanks in advance

 

Victor

3 REPLIES
New Member

Hi vpsalazar,

Hi vpsalazar,

Dial peers are simple enough. See if these POTS dial peers guide you in the right direction.

dial-peer voice 1001 pots
trunkgroup POTS
description PSTN Local - Information
destination-pattern [2-8]11
forward-digits 3
!
dial-peer voice 1002 pots
trunkgroup POTS
description PSTN Local - Local
destination-pattern [2-9]..[2-9]......
forward-digits 10
!
dial-peer voice 1003 pots
trunkgroup POTS
description PSTN - Long Distance
destination-pattern 1[2-9]..[2-9]......
forward-digits 11
!
dial-peer voice 1004 pots
trunkgroup POTS
description PSTN - International
destination-pattern 011T
prefix 011

New Member

Just one question.

Just one question.

what is a trunkgroup. I recently took a CME class and they didn't talk about it.

other than that the dial peers he gave you should work

New Member

Hi Joshuabowers,

Hi Joshuabowers,

Trunkgroups are just logical ports.  So instead of configuring a bunch of fxo/fxs individually, you can use trunkgroups and assign each fxo/fxs to them and then just use the trunkgroup when you configure.

Simple example:

trunk group POTS

description TRUNK GROUP FXO

hunt-scheme sequential

voice-port 0/0/1

trunkgroup POTS

voice-port 0/0/2

trunkgroup POTS

dial-peer voice 1001 pots

trunkgroup POTS

description PSTN Local - Information

destination-pattern 9[2-8]11

forward-digits 3

dial-peer voice 1002 pots

trunkgroup POTS

description PSTN Local - Local

destination-pattern 9[2-9]..[2-9]......

forward-digits 10

71
Views
0
Helpful
3
Replies