Defining unique holidays in Unity for different branch offices
A client is building a centralized Unity system at their head office which is intended to provide voicemail services to all regional branch offices. In some cases branch offices have different holidays than others. In Unity it seems one can only define holidays at a system wide level. Is there any way I can configure some sort of branch specific "Holiday Profile" for lack of better term? Thanks in advance.
Re: Defining unique holidays in Unity for different branch offic
You can't do this without some type of user intervention.
Note: A single Unity server can be integrated with multiple CallManagers at different sites where they maintain a different holiday schedule at each site. Currently, Cisco Unity does not support multiple holiday schedules for each location. As a workaround, dummy mail boxes can be configured at each location for the holiday greeting and the operator's phone can be forwarded to the new Holiday Greeting on holidays.
Essentially what you would have to do is check and un-check observe holidays on the schedules that will be on holiday.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...