When Unity UM 4.2(1) was installed, permissions were set so that Unity was only allowed to import subscribers from exchange. It was also restricted from administering AD.
Now, when I attempt to delete a Unity subscriber from the SA, I get "Delete Failed "E_Notifier_User_Not_Monitored)" and the subscriber stays put. But if Bulk Edit is used to attempt to delete that subscriber from Unity, this is in the log:
**** User has opted to only remove properties from objects in AD for deleted subscribers ****
** Deleting Subscriber **
Syncronization process failed to complete in a timely fashion. Check the SQLSyncSvr logs in the \Commserver\Logs directory
(error)SQL Sync to directory failed when deleting subscriber with alias= XXXXXX.
but even though it seems to have failed, the user no longer appears as a subscriber under system administration.
I only need to delete a Unity UM subscriber from Unity and not from AD. Why am I not able to do this with the Unity SA page?
Re: Delete Unity subscribers imported from Exchange
Although I'm not able to view the 2nd bug ID, at least the first bug somewhat explains the problem I'm seeing. The biggest difference being that the user was manually imported in the SA, not with a template. But this helps explain alot. Thanks!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...