Deleting messages with Outlook - IMAP4 client Unity 4.2
In preparation for an upcoming install, I set up a Unity 4.2 with separate exchange server and configured the exchange for IMAP4 according to the Cisco doc.
My client machine is a standalone XP box with Outlook 2003. I configured the IMAP account as my default and it succesfully shows and plays voice messages with VMO.
My problem is when select delete message, it stays in the Inbox with a slash through it. It can't be dragged to the Deleted Items folder and it can only be marked new. The message has been deleted on the Unity side and the MWI lamp goes off.
I noted the following, "The Cisco Unity system installed into an existing Active Directory environment is not supported. The supported configuration in this document is one in which the Active Directory and Exchange infrastructures are built out and dedicated to the Cisco Unity system. For installations that use an existing Active Directory environment for either voice messaging or unified messaging, the solutions provided in this white paper do not apply."
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...