Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Deploying CUCM 8.x on MCS7835 I2 platform

Hello:

My Company is in discussion of deploying an early version of CUCM 8.x from 6.x. We are currently using the 7835 I2 platform which is supported on the 8.x platform; however, the product will be end of support in May 2014. Is anyone aware of 8.x issues due to 7835 platform?  I know that UCS is the preferred platform; however, we may want to leverage our hardware until the end of support. Any information that you can provide will be helpful.

Thanks!

2 REPLIES
Hall of Fame Super Silver

Deploying CUCM 8.x on MCS7835 I2 platform

Supported MCS servers are fine with latest versions of CUCM as long as you meet RAM and HDD requirements, which you may want to confirm.

HTH,

Chris

Re: Deploying CUCM 8.x on MCS7835 I2 platform

In addition to Chris' point, if customer wants to continue with IBM branded MCS servers, there is nothing to worry because Cisco has not stopped rebranding/resaling IBM made servers under their MCS portfolio as they did for HP or eventually will do completely. So if any hardware goes end of support, you would very much have the replacement hardware available from IBM & supported by Cisco.


GP.

Pls rate helpful posts !!

250
Views
0
Helpful
2
Replies
CreatePlease to create content