Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

DHCP Relay using Brocade Switches


I have a large project with 3 UCM cluster with unity cluster and UCCX

The network is a Brocade switch environement,

The Core is using OSPF and distribution is Layer 2.

I have configured the Cluster with a dedicated DHCP and TFTP service.

DHCP relay is not working, but when i configure one of the phones with a static IP address it registers and I have full functionality

When I connect my server dirrectly to the core which is not the design then the dhcp relay works and I get an IP address, but when i traverse the layer2 then i do not get an address.

In the same topology I connected a Windows DHCP server on the same vlan as my UCM cluster and change the relay address to point to the windows dhcp the i do get an address.

In an additional test i configured the same setup on cisco switches then the relay works great.

If anyone has seen or knows of any bug regarding DHCP relay i would be greatful for info



CreatePlease to create content