02-01-2006 09:23 AM - edited 03-18-2019 05:32 PM
I've researched to see if I can find an answer to this question and as to date, I haven't so I'm posting it here.
Is it possible for someone to dial directly to a Unity subscriber mailbox. For instance on our current voicemail system (Coral Message Center) if a user dials 1 and the extension (ex: 12348) it takes them directly to the user mailbox to leave a message. Is it possible to do this with Unity and if so how. Thanks in advance.
Josh
Solved! Go to Solution.
02-01-2006 09:35 AM
This is best when implented as a dialplan feature on the phone system. For example, here is a tech tip for CCM that will allow you to configure exactly what you describe (the tech tip uses * as the leading digit but it could easily be replaced with a 1).
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dea82.shtml
Also, from within Unity callers can go directly to a subscriber greeting by dialing
Regards,
Eric
02-01-2006 09:35 AM
This is best when implented as a dialplan feature on the phone system. For example, here is a tech tip for CCM that will allow you to configure exactly what you describe (the tech tip uses * as the leading digit but it could easily be replaced with a 1).
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dea82.shtml
Also, from within Unity callers can go directly to a subscriber greeting by dialing
Regards,
Eric
02-01-2006 11:18 AM
Thank you for your quick response. This is what I was looking for. Thanks again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: