Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Digit strip over MPLS Sip Trunks?

I have a CCM6 server behind a 2821 router connected to an MPLS network. The MPLS link is configured for SIP trunks. If the Telco is forwarding 10 digits down the SIP trunks to CCM, is there a way to strip that down to 4?

2 REPLIES
Silver

Re: Digit strip over MPLS Sip Trunks?

Hi,

Is the SIP trunk configured directly on CallManager?

If so, use a translation pattern in CCM.

Or if there is a SIP dial peer on your 2821, then you will need to configure a Voice Translation Profile. Have a look here to get you started:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

Cheers,

Tim

New Member

Re: Digit strip over MPLS Sip Trunks?

We actually resolved this by adjusting the significant digits setting for the SIP trunk in CCM.

Thanks for the link, I've used that before in CME systems. Pretty good except for the 15 entries per rule limit, though I did find a quick-n-dirty work around.

235
Views
0
Helpful
2
Replies
CreatePlease to create content