Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Directory handler fails transfer on forwarded phone

Hello. Running Unity 4.0(5). Have a call handler that allows for entering a subscriber's extension or press 4 to go to a directory handler that allows for the name to be spelled. When a caller enters the extension OR goes to the directory handler and spells the user's name, and the target subscriber has their phone forwarded, the call transfer fails. I find that when I change in the Transfer Type for the subscriber from Release To Switch to Supervise Transfer that the issue resolves itself. However, I dont want to go through each user's box and change that. Any ideas where I should look for this issue and if anyone out there has experienced a similar issue. Please let me know if you need more info. Thanks.

5 REPLIES
Cisco Employee

Re: Directory handler fails transfer on forwarded phone

Can't say why release would not be working but supervised would - but you can change this setting for everyone in one step using BulkEdit if you need to rather than going through the SA interface one at a time. You'll find BulkEdit in the Tools Depot on your desktop.

New Member

Re: Directory handler fails transfer on forwarded phone

I figured I could do the bulk edit. It is really strange that this is happening on this one Unity system and not my other two. I appreciate the help. If anyone else has seen this let me know.

Cisco Employee

Re: Directory handler fails transfer on forwarded phone

Probably need TAC to look at traces to know what is really going on. Before that, it may be worth your effort to try the latest TSP release. You didn't state what TSP version you have so I'll assume 8.0(1) which was released with Unity 4.0(5). There have been many transfer related bugs resolved in the TSP since then.

-Eric

Hall of Fame Super Silver

Re: Directory handler fails transfer on forwarded phone

Does it fail when the forwaring is set to an external number? If yes, that is probably because the Unity restriction tables are not configured to allow dialing out.

Chris

Cisco Employee

Re: Directory handler fails transfer on forwarded phone

Actually, it can't be the restriction tables. The RTs are only enforced at the time you _change_ a transfer number (or delivery or fax) number. The RT of the user making the change (either via the phone or web interface) is checked to see if it's a legal change. At the time we do the dial/transfer, the RT is not consulted. The reason for this is many times users have RTs that allow them to do _nothing_ (i.e. all numbers are illegal) and admins/help desk folks make changes for them. If the RT was checked at dial time, they would always fail...

140
Views
0
Helpful
5
Replies
CreatePlease to create content