Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Distribution list for Unity Conenction 2.1.0

Hi, I have a customer who wish to create a single list with many end users in the list. He wants to record a single message and send to all the users in the list. Is there a way to achieve the above in CUC 2.1.0? I created a distrubution list in CUC but could not figure out how to access the list in order to leave a message and send to all the users. Any ideas?

Regards,

Chandrasen

2 REPLIES
Hall of Fame Super Red

Re: Distribution list for Unity Conenction 2.1.0

Hi Chandrasen,

This is most possible :) To send a message to the Distribution List , you will use the normal "Message Send" function via the Telephone interface;

To Send a Voice Message by Phone Using Touchtone Keys

--------------------------------------------------------------------------------

Step 1 Log on to Cisco Unity Connection.

Step 2 Press 2.

Step 3 Record your message at the tone. Use the following keys as you record:

Step 4 When you are finished recording, press #.

Step 5 Follow the prompts to address your message. Press # # to switch between spelling and number entry

(**this is where you will mark the address to send to the newly created Distribution List).

Step 6 Press # to confirm the recipient.

Step 7 Press 1 to add another name or list.

Or

Press # to send the message.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user/guide/2xcucug110.html#wp1082628

Changing Private List Settings

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user/guide/2xcucug220.html

Hope this helps!

Rob

New Member

Re: Distribution list for Unity Conenction 2.1.0

Hi Rob,

Great, it is working.

Thank you very much for your help.

Chandrasen

127
Views
5
Helpful
2
Replies