As I said you need to determine if you want to use build in CM directory or integrate with AD, for built in directory all you need to do is add all users under User Management--> End Users and assign Telephone Number
For AD integration you need to enable DircSync service, and configure LDAP under System -->LDAP, to do this you need to know your Active Directory structure. For example assume you want to pull all users from the default Users container you would create the following Search Base:
CN=Users, DC=directory_name, DC=com
and point to the LDAP server.
The if you also want to authenticate against AD you will need to similary configure LDAP Authentication.
Let me ask you again, do you need to integrate with Active Directory? If not then the simplest way will be to configure all the users in CallManager and use native corproate directory, you will not have to do anything besides adding the users under user management --> End Users.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...