Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DST - CUE - how to tell what version

I am telneted into the module. When I do s sh sof ver I get the following

- Installer 2.2.1

- Thirdparty 2.3.2

- Bootloader 2.1.2

- Infrastructure 2.3.4

- Global 2.3.4

- Serv Engine Lic 2.1.2

- Auto Attend 2.3.0

- Voice Mail 2.3.2

- Bootloader 2.1.2

- Core 2.3.4

- GLC 2.3.0

Now looking at this , to tell what version I am at. Do i take the Core or global. I see they are always both the same.

4 REPLIES
Hall of Fame Super Red

Re: DST - CUE - how to tell what version

Hi Don,

In the show software versions display, the current Cisco Unity Express software version is shown as the Global version. The other versions shown are for internal components of the product and may not correspond to the actual software version.

From this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/cmdref/s_cmds.html#wp1266352

Hope this helps!

Rob

New Member

Re: DST - CUE - how to tell what version

cool thanks, that what I thought but I wasnt sure if it was core or global. Wanted to double check before I went ahead and informed my client on what ones we need to update.

Hall of Fame Super Red

Re: DST - CUE - how to tell what version

Hi Don,

Yes, it's good to try and decipher these numerous version #'s. Best of luck with the dreaded DST updates.

Take care,

Rob

New Member

Re: DST - CUE - how to tell what version

thanks,

i dont dread them, I actually updated several other clients. I informed this client back in Jan of 2007. Now all of a sudden then want reports/configs ... they are running around crazy

thanks again

122
Views
5
Helpful
4
Replies