Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enabling mobility on Call Manager ...

Hi,

now we planning to enable Mobility on some IP Phone in Our cluster which run CCM 6.1 i would like to knew if by enabling this option it consume more licence units or what??

Thanks

Moe

1 REPLY

Enabling mobility on Call Manager ...

Hi Moe,

Licensing for Cisco Unified Mobility

This section contains information on licensing for Cisco Unified Mobility.

Cisco Unified Communications Manager Administration Configuration Tips and GUI Changes

System  > Licensing > License Unit Calculator—Displays a row for Mobility  Enabled End User (Adjunct), which displays the number of device license  units that are consumed and credited for adjunct devices that are used  specifically for Cisco Unified Mobility.

User  Management > End User—Displays the Enable Mobility check box, which  triggers device license units to get consumed; works in conjunction with  the Primary User Device drop-down list box.

If you check the Enable Mobility check box and fail to choose an adjunct  device from the Primary User Device drop-down list box, four device  license units (DLUs) get consumed, as indicated in the Mobility Enabled  End Users row in the License Unit Calculation window.

If you enable Cisco Unified Mobility and later choose an adjunct device  from the Primary User Device drop-down list box, the system credits you  with two DLUs, as indicated in the Mobility Enabled End Users row in the  License Unit Calculation window.

User  Management > End User—Displays the Primary User Device drop-down  list box, which controls the number of device license units that are  consumed for adjunct devices for Mobile Connect; works in conjunction  with the Enable Mobility check box in the End User Configuration window.

After you check the Enable Mobility check box, choose an adjunct device  that you want to assign to the user specifically for Cisco Unified  Mobility. For example, choose a device, such as a desktop phone, that  the user uses in addition to the cell phone for Cisco Unified Mobility.

Before you choose an adjunct device, consider the following information:

Only devices that consume two or more device license units (DLUs) display in the drop-down list box.

For  Cisco Unified Mobility, you cannot assign the same device to multiple  users, so only the devices that you can assign display in the drop-down  list box.

If  you check the Enable Mobility check box and choose a device from the  drop-down list box, two DLUs get consumed, as indicated in the Mobility  Enabled End Users (Adjunct) row in the Licensing Unit Calculation  window.

If  you delete the device from Cisco Unified Communications Manager  Administration or remove the assignment after you enable Mobile Connect,  two DLUs get consumed after you delete the device or remove the  assignment, as indicated in the Mobility Enabled End Users row in the  License Unit Calculation window.

Please refer the below release notes for more information.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html

Hope it helps.

Anand

Please rate helpful posts by clicking on the stars below the right answers !!

1038
Views
0
Helpful
1
Replies
CreatePlease to create content