Using CM4.1.3 SR4D, I recieve device trnasient connection errors on various ATA devices from the subscriber. The CM Web admin shows devices are registered with subscriber. I have reset devices and viewed in subscriber event app log and still see the error. In sniffer traces I see there seems to be a problem tagged but it may not be a real issue. Has anyone seen this and have resolved the event app log error?
In Call Manager, viewing the ATA which are rejecting, I do not see a second line configured. I seen this post previously and thought it would cure this issue but wasnt able to find the second line anywhere.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...