01-31-2014 12:47 PM - edited 03-19-2019 07:50 AM
I would like to get the requirement version for Exchange to work with CUCM 9.1.X
I am wondering where can I found the matrix table, and be sure that the Exchange is running the right compatible service pack, etc.
thanks
Solved! Go to Solution.
01-31-2014 07:17 PM
There is a technote from Microsoft for Microsoft Exchange 2010 Unified Messaging PBX Configuration Note for Cisco Unified Communications Manager 8.0
http://www.microsoft.com/en-us/download/details.aspx?id=13591
I did not find anything for cucm 9.x, probably Microsoft will have answer for that.
However, there is a Cisco doc for Microsoft Exchange for IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1)
HTH
Manish
01-31-2014 01:01 PM
This should be everything you need -
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/design/guide/9xcucdg032.html#wp1141552
Thanks,
Tony
Please rate helpful posts!
01-31-2014 02:01 PM
This is a Unity Documentation with Exchange.. I am actually looking to implement CUCM with Exchange ( who will act as a voice mail server )
01-31-2014 02:35 PM
Do you mean MS Lync?
Thanks,
Tony
Please rate helpful posts!
01-31-2014 07:17 PM
There is a technote from Microsoft for Microsoft Exchange 2010 Unified Messaging PBX Configuration Note for Cisco Unified Communications Manager 8.0
http://www.microsoft.com/en-us/download/details.aspx?id=13591
I did not find anything for cucm 9.x, probably Microsoft will have answer for that.
However, there is a Cisco doc for Microsoft Exchange for IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1)
HTH
Manish
02-01-2014 11:04 PM
Hi,
You just need to have a SIP trunk between CUCM and Exchange UM.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: