Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Exchange Unified Messaging with CUCM 9.x

I would like to get the requirement version for Exchange to work with CUCM 9.1.X

I am wondering where can I found the matrix table, and be sure that the Exchange is running the right compatible service pack, etc.

thanks                  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Exchange Unified Messaging with CUCM 9.x

There is a technote from Microsoft for Microsoft Exchange 2010 Unified Messaging PBX Configuration Note for Cisco Unified Communications Manager 8.0

http://www.microsoft.com/en-us/download/details.aspx?id=13591

I did not find anything for cucm 9.x, probably Microsoft will have answer for that.

However, there is a Cisco doc for  Microsoft Exchange for IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/exchange_integration/9_1_1/CUP0_BK_ID1B3B64_00_imp-exchange-integration-guide-91_chapter_0101.html

HTH

Manish

5 REPLIES
Silver

Exchange Unified Messaging with CUCM 9.x

This should be everything you need -

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/design/guide/9xcucdg032.html#wp1141552

Thanks,
Tony

Please rate helpful posts!

Please rate helpful posts
Thanks,
Tony
New Member

Exchange Unified Messaging with CUCM 9.x

This is a Unity Documentation with Exchange..  I am actually looking to implement CUCM with Exchange ( who will act as a voice mail server )

Silver

Exchange Unified Messaging with CUCM 9.x

Do you mean MS Lync?

Thanks,
Tony

Please rate helpful posts!

Please rate helpful posts
Thanks,
Tony
Cisco Employee

Exchange Unified Messaging with CUCM 9.x

There is a technote from Microsoft for Microsoft Exchange 2010 Unified Messaging PBX Configuration Note for Cisco Unified Communications Manager 8.0

http://www.microsoft.com/en-us/download/details.aspx?id=13591

I did not find anything for cucm 9.x, probably Microsoft will have answer for that.

However, there is a Cisco doc for  Microsoft Exchange for IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/exchange_integration/9_1_1/CUP0_BK_ID1B3B64_00_imp-exchange-integration-guide-91_chapter_0101.html

HTH

Manish

Exchange Unified Messaging with CUCM 9.x

Hi,

You just need to have a SIP trunk between CUCM and Exchange UM.

Thanks

312
Views
0
Helpful
5
Replies
CreatePlease login to create content