I don't know of one either, but it would be great to have, same for call handlers. I recently had to move a call handler application from one Unity server to another - and it was a fun lengthy one :-)
For our Unity servers, we recreate the original Unity worksheets and document the account policies, class of service, and subscriber templates in use for each server and their settings; for example we have a General Unity Subscribers COS; a voicemail only COS that disables the PCA and TTS features etc. We have many templates, typically for 0-out operator or call handler routing. We created a template called 'Subscribers with No 0-out' as a default for our admins to use that set most of the settings we require, passwords, message length, conversation etc. It is the same on each Unity server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...