Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EXT3-fs error (device sda6): in CONSOLE of CUCM 9.1

                   Hello my friends,

After several days of having my CUCM working properly, the CUCM show me EXT3-fs error (device sda6): xxxxxx , my TFTP service is down and never go UP again. I restart the server and the problem didnt go away.

Any idea whats going on????

Someone know what troubleshooting can i do?

I appreciate your help....

CUCM 9.1

ESXi 5.1

Attache the ERROR

2 REPLIES
Cisco Employee

EXT3-fs error (device sda6): in CONSOLE of CUCM 9.1

I got that kind of error in my lab after a power failure, the vmdks got corrupted and I had to rebuild (I use a NAS and iSCSI for my lab), you might want to run the recovery disk in first place, worst case scenario, I hope you have a backup to rebuild.

Are you sure nothing happened to the server or wherever you have the vmdks???

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

EXT3-fs error (device sda6): in CONSOLE of CUCM 9.1

Hello Jaime,

I do have the backup, but i didnt do the recovery, i reinstall all the server again, rigth now its good and all the services are UP. But what if it happens again. =(

Are you sure nothing happened to the server or wherever you have the vmdks???

The server does not show any kind of alerts. 

Im goint to download some infomation from the console of the server just to check everything its fine with the vmdks.

Have you heard about a BUG in ESXi5.1 when you install CUCM 9.1 ??

Thanks for you answer

214
Views
0
Helpful
2
Replies