Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Extension Mobility change CSS

Hi,

I'm trying to set up a phone's that when the user is logged in, they have external access to calls, and when they are logged out, they have Internal access to calls only. Ths is easy to do when I am using different lines per profile but I can't think of how to do it using te same line in both profiles. CCM doesn't allow you to define 2 different set's of settings for one line. Any suggestions?

2 REPLIES
New Member

Re: Extension Mobility change CSS

pls try this:

ip phone's line config:

=======================================

dn: 100

partition: none (or lower priority in everybody's css)

css: css without outgoing calls

em logout profile: use current device settings

device profile's config:

=======================================

dn: 100

partition: (highest priority in everybody's css)

css = (powerful css)

this will not be a shared directory numbers because they belong to a different partition

New Member

Re: Extension Mobility change CSS

Hi,

I'm trying to do the same, but when the user is logged on the phone, another user can't reach him (Fast Busy).

I found a document from Cisco, Document ID 70393 (Call Failure from Cisco IP Phone with Extension Mobility (EM) User Device Profile Logged In, to Cisco IP Phone in EM Logout Mode).

It suggests to use a CFNA setting, which worked, but the problem is if the user is logged in and someone try to call him, after the No Answer timer expires the calling phone hears fast busy.

Let me know if you found someway to deploy it without those issues...

175
Views
0
Helpful
2
Replies