1. Yes you can. In CUCM go to System>Service Parameters. Choose your server and then choose the service "Cisco Extension Mobility (Active)". There is a parameter called Remember the Last User Logged In, set it to true.
2. I don't understand this. The Extension Mobility authenticates with the PIN which is just numbers.
Because phone services use the PIN, and that data is ONLY stored in CUCM, and it does not sync to anything. SSO documentation never mentions you'll get EM login via LDAP, not sure why it's so surprising, or why you were expecting that, when no doc says that it would happen.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...